september 2010 doc id 15858 rev 2 1/10 10 stth10lcd06 turbo2 ultrafast - high voltage rectifier for flat panel displays features ultrafast switching low reverse current low thermal resistance reduces conduction and switching losses insulated package to-220fpac: ? insulated voltage: 2500 v rms ? typical package capacitance: 12 pf description the stth10lcd06 uses st turbo2 technology. this device is suited for power applications in flat panel displays and especially applicable to switching power supplies in lcds. table 1. device summary i f(av) 10 a v rrm 600 v t j 175 c v f (typ) 1.3 v t rr (max) 50 ns k a k a a to-220fpac stth10lcd06fp k a to-220ac stth10lcd06d k a a k dpak stth10lcd06sb-tr a a k d 2 pak STTH10LCD06SG-TR www.st.com
characteristics stth10lcd06 2/10 doc id 15858 rev 2 1 characteristics to evaluate the conduction losses use the following equation: p = 1.20 x i f(av) + 0.040 x i f 2 (rms) table 2. absolute ratings (limiting values per diode at 25 c, unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) forward current rms dpak 18 a to-220ac, to-220fpac, d 2 pa k 3 5 i f(av) average forward current, = 0.5 t c = 105 c to-220ac, dpak, d 2 pa k 1 0 a t c = 55 c to-220fpac, 10 a i fsm surge non repetitive forward current t p = 10 ms sinusoidal 100 a t stg storage temperature range -65 to + 175 c t j maximum operating junction temperature (1) 175 c 1. condition to avoid thermal runaway for a diode on its own heatsink dp tot dt j --------------- 1 r th j a ? () ------------------------- - < table 3. thermal resistance symbol parameter value unit r th(j-c) junction to case to-220ac, dpak, d 2 pa k 3 . 5 c/w to-220fpac 6 table 4. static electrical characteristics symbol parameter test conditions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm --5 a t j = 150 c - 13 130 v f (2) forward voltage drop t j = 25 c i f = 10 a --2 v t j = 150 c - 1.3 1.6 1. pulse test: t p = 5 ms, < 2 % 2. pulse test: t p = 380 s, < 2 % table 5. dynamic electrical characteristics symbol parameter test conditions min. typ. max. unit t rr reverse recovery time i f = 1 a, di f /dt = -50 a/s, v r = 30 v, t j = 25 c -3550ns i rm reverse recovery current i f = 10 a, di f /dt = -50 a/s, v r = 400 v, t j = 125 c -2.02.8a t fr forward recovery time i f = 10 a di f /dt = 100 a/s v fr = 1.1 x v fmax , t j = 25 c - - 230 ns v fp forward recovery voltage i f = 10 a di f /dt = 100 a/s v fr = 1.1 x v fmax , t j = 25 c -4-v
stth10lcd06 characteristics doc id 15858 rev 2 3/10 figure 1. conduction losses versus average current figure 2. forward voltage drop versus forward current 0 2 4 6 8 10 12 14 16 18 20 22 0123456789101112 =0.05 =0.1 =0.2 =0.5 =1 t =tp/t tp p (w) f(av) i (a) f(av) 0 10 20 30 40 50 60 70 80 90 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 t j =25c (maximum values) t j =150c (maximum values) t j =150c (maximum values) t j =150c (typical values) t j =150c (typical values) i (a) fm v (v) fm figure 3. relative variation of thermal impedance junction to case versus pulse duration figure 4. relative variation of thermal impedance junction to case versus pulse duration (to-220fpac) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-03 1.e-02 1.e-01 1.e+00 single pulse z/r th(j-c) th(j-c) t (s) p to-220ac, dpak and d pak 2 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 single pulse to-220fpac z/r th(j-c) th(j-c) t (s) p figure 5. peak reverse recovery current versus di f /dt (typical values) figure 6. reverse recovery time versus di f /dt (typical values) 0 1 2 3 4 5 6 7 8 9 10 11 12 10 100 1000 if = 10a v r =400v t j = 125 c t j = 25 c i (a) rm di /dt(a/s) f 0 20 40 60 80 100 120 140 160 180 200 220 0 50 100 150 200 250 300 350 400 450 500 if = 10a v r =400v t j = 125 c t j = 25 c t (ns) rr di /dt(a/s) f
characteristics stth10lcd06 4/10 doc id 15858 rev 2 figure 11. junction capacitance versus reverse voltage applied (typical values) figure 7. reverse recovery charges versus di f /dt (typical values) figure 8. relative variations of dynamic parameters versus junction temperature 0 50 100 150 200 250 300 350 400 450 500 10 100 1000 if = 10a v r =400v t j = 125 c t j = 25 c q (nc) rr di /dt(a/s) f 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 25 50 75 100 125 i rm q rr i f =i f(av) v r =400v reference: t j =125c t (c) j figure 9. transient peak forward voltage versus di f /dt (typical values) figure 10. forward recovery time versus di f /dt (typical values) 0 1 2 3 4 5 6 7 8 9 10 11 12 0 100 200 300 400 500 i f =i f(av) tj=125c di /dt(a/s) f v (v) fp 0 50 100 150 200 250 300 350 400 0 100 200 300 400 500 i f =i f(av) v fr =1.1 x v f max. t j =125c t (ns) fr di /dt(a/s) f 1 10 100 1 10 100 1000 f=1mhz v osc =30mv rms tj=25c c(pf) v (v) r
stth10lcd06 package information doc id 15858 rev 2 5/10 2 package information epoxy meets ul94, v0 cooling method: by conduction (c) recommended torque value: 0.4 to 0.6 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 6. to-220ac dimensions ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 h2 10.00 10.40 0.393 0.409 l2 16.40 typ. 0.645 typ. l4 13.00 14.00 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. i 3.75 3.85 0.147 0.151 a c d l7 ? i l5 l6 l9 l4 f h2 g l2 f1 e m
package information stth10lcd06 6/10 doc id 15858 rev 2 table 7. to-220fpac dimensions ref. dimensions millimeters inches min. max. min. max. a 4.4 4.6 0.173 0.181 b 2.5 2.7 0.098 0.106 d 2.5 2.75 0.098 0.108 e 0.45 0.70 0.018 0.027 f 0.75 1 0.030 0.039 f1 1.15 1.70 0.045 0.067 g 4.95 5.20 0.195 0.205 g1 2.4 2.7 0.094 0.106 h 10 10.4 0.393 0.409 l2 16 typ. 0.63 typ. l3 28.6 30.6 1.126 1.205 l4 9.8 10.6 0.386 0.417 l5 2.9 3.6 0.114 0.142 l6 15.9 16.4 0.626 0.646 l7 9.00 9.30 0.354 0.366 dia. 3.00 3.20 0.118 0.126 h a b dia l7 l6 l5 f1 f d e l4 g1 g l2 l3
stth10lcd06 package information doc id 15858 rev 2 7/10 figure 12. footprint (dimensions in mm) table 8. dpak dimensions ref. dimensions millimeters inches min. max. min. max. a 2.20 2.40 0.086 0.094 a1 0.90 1.10 0.035 0.043 a2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b2 5.20 5.40 0.204 0.212 c 0.45 0.60 0.017 0.023 c2 0.48 0.60 0.018 0.023 d 6.00 6.20 0.236 0.244 e 6.40 6.60 0.251 0.259 g 4.40 4.60 0.173 0.181 h 9.35 10.10 0.368 0.397 l2 0.80 typ. 0.031 typ. l4 0.60 1.00 0.023 0.039 v2 0 8 0 8 h l4 g b l2 e b2 d a1 r r c a c2 0.60 min. v2 a2 6.7 6.7 3 3 1.6 1.6 2.3 2.3
package information stth10lcd06 8/10 doc id 15858 rev 2 figure 13. footprint (dimensions in mm) table 9. d 2 pak dimensions ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.024 c2 1.23 1.36 0.048 0.054 d 8.95 9.35 0.352 0.368 e 10.00 10.40 0.393 0.409 g 4.88 5.28 0.192 0.208 l 15.00 15.85 0.590 0.624 l2 1.27 1.40 0.050 0.055 l3 1.40 1.75 0.055 0.069 m 2.40 3.20 0.094 0.126 r 0.40 typ. 0.016 typ. v2 0 8 0 8 g l l3 l2 b b2 e * flat zone no less than 2mm a c2 d r a2 m v2 c a1 * 16.90 10.30 8.90 3.70 5.08 1.30
stth10lcd06 ordering information doc id 15858 rev 2 9/10 3 ordering information 4 revision history table 10. ordering information order code marking package weight base qty. delivery mode stth10lcd06d stth10lcd06d to-220ac 1.86 g 50 tube stth10lcd06fp stth10lcd06fp to-220fpac 1.8 g 50 tube STTH10LCD06SG-TR stth10lcd06sg d 2 pak 1.8 g 1000 tape and reel stth10lcd06sb-tr th10lcd06sb dpak 1.8 g 2500 tape and reel table 11. document revision history date revision description of changes 15-jul-2009 1 first issue 30-sep-2010 2 updated value of i fsm in ta b l e 2 .
stth10lcd06 10/10 doc id 15858 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
